WMD-1005

Water-in-Oil Monitors and Systems
Usage: 

Water-in-Oil Monitors and Systems. Measurement of free Water in Oil.

Specification: 
Range:0 – 600 ppm “free” water
Resolution:1 ppm, lower Range
Accuracy:Up to ± 10 ppm below 100 ppm
Response Time:< 5 sec.
Linearity:0 – 100 ppm better than ± 2 %
Display:Full Colour Graphic
Datalogging SystemYes
Power Supply:24 V – 240 V AC or DC
Consumption:< 10 VA
Alarm Points 1, 2:Adjustable, (Works adjustment 70 ppm)
Alarm 1 Operating Delay: (for annunciation purpose)Adjustable between 1 – 540 sec. (Works adjustment 2 sec.)
Alarm 2 Operating Delay: (for control purposes)Adjustable between 1 – 540 sec. (Works adjustment 10 sec.)
Alarm Indication: (Alarm 1, 2, System Fault)Red visual indicator
Alarm Contact Rating: (Alarm 1, 2, System Fault)Potential free 1 pole change over contacts, 3 A / 240 V AC
Output Signal:0 – 20 mA, ext. Load < 150 Ω Output range adjustable
Sample Pressure:0 – 10 bar
Sample Flow:Approx. 2 l/min
Sample Temperature:+ 1 to + 65° C
Ambient Temperature:+ 1 to + 45° C
Size: Computer Unit200 mm W x 200 mm H x 120 mm D
Size: Measuring Cell130 mm W x 55 mm H x 70 mm D
Weight:4 kg
Degree of Protection:IP 65
Pipe Connections:R ¼" Female
> Technical specifications are subject to change without notification.