|
|
 |
|
OMD- 21 |
|
|
15 ppm Bilge Alarm according
to IMO Resolution MEPC.60 (33)
Compact
15ppm Bilge Alarm, with superior solids suppression capabilities
According to the regulations of IMO Resolution MEPC. 60 (33)
U.S. Coast Guard CFR 162.050-35 and Canadian Standard for 5ppm Bilge Alarm
The OMD-21, 15ppm Bilge Alarm exceeds the requirements of IMO Resolution MEPC.
60 (33). With the OMD-21 DECKMA
offer the most advanced oil content measuring device, to prevent reliably
pollution from oil.
The OMD-21 measures the oil content in the sample through our advanced light
scattering principle. Infrared light is passed through the sample and
captured by an array of solid state sensors. The signals are then processed
and through the application of advanced algorithms the displayed oil content
disregards virtually all influence of solids present in the sample. Thus oil
content is displayed and turbidity from other sources is disregarded.
The OMD-21 provides two independent alarm contacts, for the operation of an
audible alarm and/or operation of an automatic overboard discharge shutdown
device.
Special
versions such as shock-proof, antimagnetic for Navy application or options
like auto-clean system, higher sample throughputs are available on request.
Specification
| Range (measurement &
indication) |
0 - 50 ppm |
| Range (IMO specification) |
0 - 15 ppm (according IMO
regulations) |
| Accuracy |
better than IMO MEPC. 60 (33) |
| Electrical power supply |
24V - 240V, AC or DC, automatic
voltage adjustment |
| Electrical power consumption |
less than 6W / 6VA |
| Sample |
Oily water from separator outlet,
0,1 - 4 l/min |
| Sample temperature range |
+1°C to +65°C |
| Sample connections |
R 1/4" ISO female |
| Alarm 1 & 2 Set Points |
1 - 15ppm (independently
adjustable) |
| Alarm 1 operating delay for
annunciation |
1 - 540 sec |
| Alarm 2 operating delay for
control |
1 - 20 sec |
| Alarm contacts |
2 independently adjustable
switchover contacts |
| Alarm contact operation mode |
De-energized in Alarm State |
| Alarm contact ratings |
3A, 240V each |
| Alarm output |
0 - 20 mA or 4 - 20 mA Current
Loop, selectable |
| Display |
Numeric 2-Digit LED Display |
| Ambient temperature |
+1°C to +55°C |
| Class of protection |
IP 65 |
| Dimensions |
152 x 155 x 91 mm (WxHxD) |
| Weight |
2,55 kgs |
(Note:
The manufacturer reserves the right to change or amend specifications without
notice.)
|
|
|
|
|
|
|
|
|
|
|
Products